The Pulling & Stacking Console on Quantower
This page covers the Pulling & Stacking Indicator on Quantower, where it runs as an indicator, in its own panel under the price chart.
The Pulling & Stacking Console is one window that shows every instrument the indicator is running on. Each instrument gets a tile with its live readout, the four-window σ ladder, and a scrolling log. Alerts for all instruments collect in a Global notifications log at the bottom of the same window.
The detailed readout lives in the console instead of being stamped over the chart,
so the flow lines on the chart stay clean. On Quantower the console is a window of
its own, titled Pulling & Stacking Console (Quantower). It opens once the terms
are accepted.
What a ticker tile shows
Each tile has, from top to bottom:
- Instrument name and the feed it is subscribed through, the line the
tile reads (for example
Total Flow,Placement FloworBuy / Sell), and a bell button for that instrument's alerts. Every reading on the tile is about that line. It is the line the chart is set to unless Console Mode chooses the other family; then the chart's line is named too:Total Flow (chart: Buy / Sell). - Headline. One of:
Total Flow +4.2σ (5m): the live reading on the primary window. On a chart set to another core line the headline names it:Passive Flow -3.6σ (5m).Buy Line +3.5σ · Sell Line -1.0σ (5m): a tile reading Buy / Sell: both lines, each measured from the centre of their shared band.Total Flow +1.9σ (2m) - 5m band 40%: the primary band is still seeding, so the headline shows the longest window that is fully seeded.Total Flow ~+2.1σ (5m) - warming 40%: a provisional estimate (note the~).WARMING UP 12% - 25 min band: nothing is seeded yet.STALE - no events since 09:41:07(orange): no market events have arrived for longer than the stale timeout.WAITING FOR ORDER BOOK DATA: the instrument has not sent any depth data yet (see indicator states).PAUSEDwith the reason, for examplePAUSED - could not reach the licence server: the licence is not active on this computer, so the chart stays empty (see activating your licence). For the first seconds after the indicator starts, while the licence is checked, the tile readsPAUSED - checking your licence.- The σ ladder. Four badges for the 2, 3, 5, and 10 minute windows, for the
tile's line. In Buy / Sell mode each badge shows whichever line is further
from the band's centre, named:
5m Buy +3.5σ. A badge is green when the reading on that window is bullish (buy orders stacked or sell orders pulled) and red when it is bearish (sell orders stacked or buy orders pulled). In Flow mode that means a positive reading is green and a negative one red. In Buy / Sell mode,Buy +2.6σis green andBuy -2.6σis red, whileSell +1.7σis red andSell -1.7σis green. A badge is grey with--while that window is warming up or the feed is stale. A muted badge with~is a provisional estimate (see indicator states). - State line when one applies:
! TOP OF BOOK FIGHTING THE DEEP BOOK(orange, the deep-book warning) orABSORPTION - book leaning against the tape/INITIATIVE - book and tape aligned(the book-vs-tape state). It can also say! ORDER BOOK DATA STOPPED - ...(orange: trades arrive but the order book does not update) orNo Level II depth received; see indicator states. It can also start with! SHALLOW BOOK - the feed gives fewer levels per side than the Level Depth of 10, so the readings cover only those levels.(orange; see indicator states). - A scrolling log. A line is added when the reading's status changes
(waiting for data, warming up, provisional, live, stale, paused), and, while
the reading is live, when the state line changes and the new state has held
for 10 seconds; a new
PAUSEDreason is added once it has held for 10 seconds too. The no-data hints (No Level II depth received,No market data received. ...) show on the state line only; the log keeps itsWAITING FOR ORDER BOOK DATAline. A steady reading adds no lines. Each line carries the full reading at that moment:
15:53:31 Total Flow +4.2σ (5m) | 2m +1.4σ 3m +2.5σ 5m +4.2σ 10m +4.0σ | Passive 2030 Aggressive 8 Placement 2022 | INITIATIVE - book and tape aligned
headline, ladder, the Passive, Aggressive and Placement components in
contracts, then the state. Alerts for that instrument's time bands appear in
the same log, naming the line: ALERT 5m Total Flow crossed +3.0σ (+3.4σ).
The log is bounded and scrolls automatically.
On instruments traded in fractions (for example bitcoin) the Passive,
Aggressive and Placement components are counted in the instrument's lot step:
with a 0.001 step, 1 BTC reads 1,000.
Reading several instruments at once
Tiles arrange themselves in a grid that reflows as the window is resized. Each
window of each instrument warms up independently, so a newly added instrument shows
WARMING UP while the others are live.
- One tile per symbol, headed by the symbol and the connection in brackets, for
example
BTC/USDT [Binance Spot]. - A Market Replay gets a tile of its own, named after the instrument with
(replay). - Tiles appear in the order the instruments were added.
Price-chart markers
If your eyes are on price, not on the flow panel, the markers bring the signal
to where you are looking. An arrow is drawn on the price chart, and a MARKER
line is added to that instrument's log on its console tile, when the line your chart trades from crosses
outside its own Resistance or Support on the primary window. Arrows always
follow the chart's Line Mode, whatever the
Console Mode:
MARKER Total Flow crossed above Flow Resistance (+3.2σ, 5m)
MARKER Buy Line crossed above Buy/Sell Resistance (+3.1σ, 5m)
Green arrows below the bars mark bullish crossings and red arrows above them mark bearish ones; each sits on the bar where the Buy Line (green) or the Sell Line (red) in the panel below crossed outside its band. Shown with a 2-minute window and a 2σ band so that several crossings fit in one picture; at the defaults (5 minutes, 3σ) arrows are less frequent.
| Line mode | Lines that draw arrows | Against |
|---|---|---|
| Flow | The core line only (Total Flow by default) | Flow Resistance / Flow Support, sized from that line |
| Buy / Sell | Buy Line and Sell Line (each can be switched off) | Buy/Sell Resistance / Support of the pair on screen |
Every arrow quotes a σ figure, because every arrow is read against its own line's band. The arrow shows what the crossing means for the market, whichever line drew it:
- A green arrow pointing up, below the price, is bullish: buy orders stacked, or sell orders pulled, beyond the band. In Flow mode that is the core line crossing above Resistance.
- A red arrow pointing down, above the price, is bearish: sell orders stacked, or buy orders pulled, beyond the band. In Flow mode that is the core line crossing below Support.
So the Sell Line crossing above Resistance (sell orders stacked) draws a red arrow pointing down, and the Sell Line crossing below Support (sell orders pulled) draws a green arrow pointing up. The note in the console still names the line and the crossing. The arrow is drawn on the bar where the crossing happened: a bullish arrow below the bar's low, a bearish one above its high. On Quantower the arrows are large and bold, about as wide as a candle at any zoom.
A hidden core line draws no arrows, and a band is only ever read by the line it was sized from.
- A marker is a prompt to look at the flow panel or the console, not a signal to trade.
- It uses the band you set (S/R Standard Deviations), needs no alert to be switched on, and follows the same minimum interval as the alerts.
- Markers are drawn only when the band is fully warm and the feed is live.
- Show Flow Markers On Price Chart in the indicator's settings is the master switch. In Buy / Sell mode, Buy Line Arrows and Sell Line Arrows choose which lines draw them.
- Arrow colours are fixed: green up is bullish, red down is bearish.
If you cannot hear the alerts
Open Global notification settings in the console and press Test sound.
- If it reports that the sound played but you hear nothing, the problem is the volume or the output device, not the indicator.
- The sound is a Windows notification sound. If it cannot play, the indicator uses the system beep and says why, next to the button and once in Global notifications.
- Notification sound is off by default; alerts still appear as text.
Per-instrument alerts (the bell)
Click the bell on a tile to choose which time bands alert for that instrument, with separate thresholds for positive and negative readings of the tile's line: the line the console reads, which is the chart's line unless Console Mode says otherwise.
| Column | Meaning |
|---|---|
| Band | The 2, 3, 5, or 10 minute window. |
| Enabled | Whether this window alerts for this instrument. Off by default. |
| Above +σ | Alert when the tile's line on this window rises through this many standard deviations. Default 3. |
| Below −σ | Alert when the tile's line on this window falls through this many standard deviations. Default 3. |
When the tile reads Buy / Sell, the Buy Line and the Sell Line each alert on their own.
An alert fires when the reading crosses the threshold, and re-arms once the reading comes back inside it. Alerts never fire while a window is warming up or the feed is stale.
Save closes the dialog and keeps your choices; Cancel closes it and keeps the previous ones. The bell itself looks the same whether or not any band is enabled, so click it again to see which bands are on and their thresholds. An alert that fires is written to the tile's log.
Global notifications
The bottom section of the console is a single log shared by every instrument. Global alerts watch the line each tile reads, on the primary window (the core line for Flow, the Buy and Sell lines for Buy / Sell; by default the chart's line, see Console Mode) against one shared threshold, and are written as
15:53:34 BTC-USDT Total Flow crossed +3.0σ (+4.3σ) (5m)
Click Global notification settings to change:
| Setting | Meaning | Default |
|---|---|---|
| Global alerts for each tile's line | Turns the shared alerts on or off. | Off |
| Global threshold (standard deviations) | The σ level that triggers a global alert. | 3 |
| Minimum alert interval per band (seconds) | Quiet period before the same band can alert again. Saving new thresholds re-arms the bands, so a band can alert at once on its new threshold. | 60 |
| Notification sound (global and ticker alerts) | Plays a sound for global and per-instrument alerts. Works while the console is hidden. | Off |
| Test sound | Plays the alert sound now, whatever the setting above, and says whether it played. Use it to check your volume and output device. | n/a |
| Scrolling text size (8 to 36) | Font size of the logs. | 12 |
Save closes the dialog and applies the settings; Cancel keeps the previous ones. A value outside its range is not saved: a message asks for a valid value and the dialog stays open. Nothing else on the console shows whether the global alerts are on, so open Global notification settings to check. A global alert that fires is written to the Global notifications log.
Opening, hiding, and closing
The console is enabled by default and opens when the indicator loads.
- Enable Pulling & Stacking Console in the indicator's settings shows or hides it.
- Closing the console window with its close box unticks Enable Pulling & Stacking Console, and the console stays closed, also after Quantower restarts, until you tick that box again on a chart.
The console does not stay above other windows unless you tick Console Always On Top in the indicator's settings. It is off by default. It is one setting for the one console: the chart where it was changed last decides, and the other charts' boxes follow it. While a Quantower settings window is open the console steps behind it, and it is on top again once none is open. Quantower's question when you close it can open behind the console: minimize the console to reach it.
Logs keep accumulating and sounds keep playing while the console is hidden. The console never places trades.
Next: indicator states
Chart images. The chart images on this site show the indicator's display on market data, to explain what it draws. They are not trading results or trade recommendations, and the risk and hypothetical performance disclosures above apply to them. We publish no trading performance. The full text is on the disclosures page.