NinjaTrader 8 settings reference
This page covers the Pulling & Stacking Indicator on NinjaTrader 8, where it runs as an indicator, in its own panel under the price chart.
Right-click the chart, choose Indicators..., and select
PullingAndStackingIndicator under Configured. A change applies when you
click OK or Apply. NinjaTrader then starts the indicator again, and the
flow engine for the contract carries on: the warm-up, the lines and arrows
already drawn on the chart and the instrument's log in the console are kept.
NinjaTrader's lists show the choices of some settings as one word (BuySell,
SameAsChart, WithExecutions); the tables give them as NinjaTrader shows
them. Changing Level Depth or Count Levels Entering The Depth
starts the lines and the warm-up again, and changing S/R Lookback Multiplier warms the bands
again over their lookback. These settings are those of the indicator for
NinjaTrader 8.1 or later.
Licence
| Setting | Meaning | Default |
|---|---|---|
| Licence Key | Paste the key from your purchase email, then tick Activate Licence. The key is kept for this computer, not in the chart or a workspace. While the licence is active it shows only the start of the key followed by dots and is greyed out. | |
| Activate Licence | Tick it and click OK or Apply to activate the licence key above on this computer. The Terms and Conditions come first: an activation waits until they are accepted. While the licence is active it stays ticked and greyed out. See activating your licence. | Off |
| Licence Status | What the licence is doing on this computer, in a few words, for example Active on this computer, Active, reconnecting or Key not found. Read only; it shows the state as it was when the Indicators window opened. The whole message is also in the console's Global notifications. |
|
| Release This Computer | In its own group below the indicator's other settings, after Misc: tick it and click OK or Apply to stop using your licence on this computer, so you can activate it on another one. It applies at once. See release this computer. | Off |
Indicator Settings
| Setting | Meaning | Default |
|---|---|---|
| Primary Window (Minutes) | Which window (2, 3, 5 or 10 minutes) drives the plots, the band and the alerts. The console ladder always shows all four. | 5 |
| Line Mode | Flow or BuySell (Buy / Sell mode). Buy / Sell includes an optional Delta Line (Buy minus Sell). See line modes. |
Flow |
| Console Mode | What this instrument's console tile and its alerts read: SameAsChart (same as the chart), Flow (the Core Line) or BuySell (the pair of the Buy / Sell Lines setting). The chart's plots, band and arrows always follow Line Mode. A Buy / Sell console on a Flow chart warms its band over the full lookback (25 minutes at the defaults). See Console Mode. |
SameAsChart |
| Level Depth | How many bid and ask price levels pulling and stacking is measured across, for every line and the console (1 to 100). Changing it starts the warm-up again. It also affects how often the deep-book warning appears. | 10 |
| S/R Standard Deviations (σ) | Width of every Resistance / Support band (Flow and Buy / Sell) in standard deviations of the line over the lookback (1 to 10). | 3 |
| S/R Lookback Multiplier | Lookback of every band, and of the warm-up, as a multiple of each flow window (1 to 20): 5 × the 5-minute window looks back 25 minutes. Changing it starts the bands' warm-up again. | 5 |
| Count Levels Entering The Depth | Off: a price level that moves into the top Level Depth levels is matched against the whole previous book, so a level that was already resting just outside the depth adds only its change in size. On: its full size counts as newly stacked each time price brings it into range, which gives larger, more price-driven readings. Changing it starts the warm-up again. | Off |
| Reset To Default Parameters | Tick it and click Apply to go back to Primary Window 5, Flow mode, Console Mode SameAsChart, Core Line Total, the default lines (Placement Flow hidden), Level Depth 10, S/R Standard Deviations 3 and S/R Lookback Multiplier 5. |
Off |
| Stale After (Seconds) | With no market data for this long, the lines grey out and the console shows STALE. |
30 |
The three calibration settings carry the same note in their descriptions: they can be changed, but changing them changes what counts as a strong reading; the defaults are a starting point, and instruments differ in pace and book depth, so adjust the depth and band settings to suit the market you trade. See calibrating the parameters.
Lines
| Setting | Meaning | Default |
|---|---|---|
| Core Line (Flow mode) | The line you trade from: Total, Passive or Placement (Total, Passive or Placement Flow). The band is sized from it, and the arrows, the console and the alerts read it. Also changed on the chart with the Band label. See Placement Flow & the core line. |
Total |
| Show Total Flow / Show Passive Flow / Show Aggressive Flow / Show Placement Flow | Which Flow lines are drawn. Also switched on the chart by clicking the line's label, which does not reload the indicator. | On, on, on, off |
| Buy / Sell Lines | Buy / Sell mode: WithExecutions (the classic lines) or PlacementOnly (each trade added back to the side it consumed). Changing it starts that band's warm-up again. |
WithExecutions |
| Show Delta Line | Buy / Sell mode: draws Buy minus Sell, the 2.x Delta line, in white, with no band. See the Delta line. | Off |
Console and arrows
| Setting | Meaning | Default |
|---|---|---|
| Enable Pulling & Stacking Console | Shows the shared console window for every instrument the indicator is loaded on. Closing the console with its close box unticks it on every chart, and the console stays closed, also after a restart, until you tick it again on a chart and click OK or Apply. | On |
| Console Always On Top | Keeps the console in front of NinjaTrader's windows, but behind a NinjaTrader settings window or dialog while one is open. One setting for the one console: the chart where it was changed last decides. | Off |
| Show Flow Markers On Price Chart | Master switch for the arrows on the price chart. In Flow mode the core line draws them; in Buy / Sell mode the Buy and Sell lines. Arrow colours are fixed: green up is bullish, red down is bearish. | On |
| Buy Line Arrows / Sell Line Arrows (Buy / Sell mode) | Which of the two lines draw arrows. | On, on |
The local data API is available on Bookmap only, not on NinjaTrader 8.
Performance
| Setting | Meaning | Default |
|---|---|---|
| Update Interval (ms) | Minimum delay between chart redraws. The flow math still runs on every event. | 100 |
Terms and Conditions
| Setting | Meaning |
|---|---|
| Show Terms and Conditions | Tick it and click Apply to open the terms window again. |
Plots
Eleven plots, one family per line mode; the plots of the other mode draw nothing. Change colours, widths and styles in NinjaTrader's own Plots properties. A line drawn grey has not warmed up yet, or the data is stale. The defaults: Total Flow cyan, Passive Flow grey, Aggressive Flow orange, Placement Flow violet (hidden by default), Buy Line green, Sell Line red, Delta Line white.
| Mode | Plots |
|---|---|
| Flow | Total Flow, Passive Flow, Aggressive Flow, Flow Resistance, Flow Support, Placement Flow |
| Buy / Sell | Buy Line, Sell Line, Buy/Sell Resistance, Buy/Sell Support, Delta Line (off by default) |
Line labels on the chart
In Flow mode the indicator panel shows a row of labels at the top right:
Total Passive Aggressive Placement Band: Total. A lit label is a line on
screen, outlined in its colour; a dim one is hidden. Click a label to show or
hide that line; click Band to move the band to the next line. Nothing
reloads and no history is lost. See
Placement Flow & the core line.
Alerts
Alert thresholds are not set in the properties. Use the bell on the instrument's tile in the console for per-window alerts, and Global notification settings in the console for the shared threshold, sound and interval. The default global threshold is 3σ. See notifications.
Several charts of one contract
All charts of the same contract share one flow engine and one console tile. The first chart loaded feeds the engine; if it is closed, the next one takes over without a warm-up.
Next: limitations
Chart images. The chart images on this site show the indicator's display on market data, to explain what it draws. They are not trading results or trade recommendations, and the risk and hypothetical performance disclosures above apply to them. We publish no trading performance. The full text is on the disclosures page.