Sigmantra
Trading PlatformsMethodologyDocsPricingContactSign in
Get the indicator
Sigmantra
Trading PlatformsMethodologyDocsPricingContactSign in
Get the indicator
Contents
Start here
Pulling & Stacking IndicatorGetting started on Classic ATAS
Signals
Flow decompositionThe σ readoutThe window ladderSupport & ResistancePlacement Flow & the core lineLine modesBuy & sell linesThe deep-book warningAbsorption & initiative
Console & alerts
The Pulling & Stacking ConsoleIndicator statesNotifications
Settings reference
Classic ATAS settings referenceLimitations
Updates & legal
Updates & deprecationTerms, patents & legal
Start here
Pulling & Stacking IndicatorGetting started on Classic ATAS
Signals
Flow decompositionThe σ readoutThe window ladderSupport & ResistancePlacement Flow & the core lineLine modesBuy & sell linesThe deep-book warningAbsorption & initiative
Console & alerts
The Pulling & Stacking ConsoleIndicator statesNotifications
Settings reference
Classic ATAS settings referenceLimitations
Updates & legal
Updates & deprecationTerms, patents & legal
Platform
BookmapMotiveWaveSierra ChartQuantowerATAS XATAS (Classic)
Documentation · 3.0.23 · for ATAS (Classic)

Indicator states on ATAS (Classic)

This page covers the Pulling & Stacking Indicator on ATAS (Classic), where it runs as an indicator, in its own panel under the price chart.

The indicator does not present dead or unseeded output as signal. This is state display, not data filtering: the engine keeps reading the raw stream, and the display says what state the data is in.

Warming up, stale, and live: three real tiles

Warming up

The indicator comes up in stages, so you are not left waiting on a blank panel. With the default settings (5-minute primary window, 5× lookback):

After What you get
5 min (one window) The flow lines. Total, Passive and Aggressive Flow are exact once one full window has been seen.
10 min A fully seeded 2-minute reading in the headline, e.g. Total Flow +1.9σ (2m) - 5m band 40%, and a provisional band on the chart.
15 min The 3-minute reading takes over the headline.
25 min The primary band is fully seeded: Total Flow +4.2σ (5m). Alerts can fire.
50 min The 10-minute ladder cell is live.

Provisional readings are estimates. Until a band has its full lookback it rests on few independent samples and tends to be too narrow, so early σ values read high. They are marked so you can tell: a ~ before the value (5m ~+2.1σ), a muted badge colour in the console, and a dashed band on the chart, which is drawn dotted once it is fully seeded. In ATAS's Drawing settings each band has two entries: the band itself and the same band "(provisional)". Provisional readings never trigger alerts.

Before the first stage the console shows progress: WARMING UP 12% - 25 min band. Each window warms independently, so the ladder fills in from left to right.

Ways to shorten the wait

  • The indicator warms from live data. The order book has no history, so the lines start from the moment you add the indicator and the bars before it stay empty.
  • Leave the platform running. The indicator loads with the platform and warms while you do something else.
  • Most setting changes do not restart the warm-up. ATAS starts the indicator again whenever you apply its settings, and also when you open them and click Cancel; the indicator keeps its flow engine for the instrument across it: the warm-up, the lines already drawn, the arrows and the instrument's log in the console are all kept. It starts over if Depth or New Levels changes (a different measurement), or if nothing has fed it for a minute (the indicator was removed and added back later). Changing Lookback × re-warms the bands over the new lookback without touching the flow lines.
  • A shorter Primary Window or S/R Lookback Multiplier warms faster, but changes what the readings mean; see calibrating the parameters.

Stale

A data stream that stops without notice can look like "flow went quiet", which reads as information when it is an outage. If no events arrive for the configured number of seconds (default 30):

  • no arrows are drawn on the price chart,
  • the tile headline turns orange: STALE - no events since 09:41:07,
  • the ladder shows --,
  • alerts are suppressed until events resume.

Waiting for order book data

WAITING FOR ORDER BOOK DATA means the instrument has not delivered a single depth event yet: no depth subscription, or a market that has not opened. If the connection sends no depth, the tile's state line says No Level II depth received.

Order book data stopped

If trades keep arriving but the order book has not changed for the stale timeout (30 seconds by default), the tile shows, in orange, ! ORDER BOOK DATA STOPPED - trades are arriving but the book is not updating, so Passive Flow is frozen. Check the Level II feed; alerts are paused. Alerts and arrows pause until the order book updates again. The stale timeout is the Stale (s) setting (Stale After (Seconds)); keep it at 10 seconds or more.

Shallow order book

If the feed gives at most half as many price levels per side as Level Depth (and at least one), on its fuller side, for 10 seconds, the tile's state line starts with, in orange, ! SHALLOW BOOK - the feed gives fewer levels per side than the Level Depth of 10, so the readings cover only those levels. (with your Level Depth). The indicator goes on working, but it measures only the levels the feed delivers, so a higher Level Depth adds nothing. Lower Level Depth to what the feed gives, or use a feed with deeper market depth. The warning clears once the feed gives more levels again.

Paused

PAUSED means the indicator is not producing output on this computer, and the chart stays empty. The text after it says why, for example PAUSED - could not reach the licence server: check your internet connection, the indicator runs only while it can confirm the licence online and starts again once it connects. If the key was not accepted, Status in the Licence group of the indicator's settings says why (see activating your licence). The same message, in full, is in Global notifications. For the first seconds after the indicator starts, while the licence is checked, the tile reads PAUSED - checking your licence; it is not a fault.

Replay

ATAS's Market Replay is read the way live data is, on the replay's own time: the 2, 3, 5 and 10 minute windows, the warm-up, the bands, the alerts and the arrows all run on the replay's clock. The replay gets its own tile in the console, named after the instrument with (replay), and its own warm-up from where it starts; a jump back starts the warm-up again, and the tile's log says so. A paused replay does not go STALE; a quiet stretch of the replayed market does, and its STALE line names the replay's time. Back on live data, the instrument's own tile and a fresh warm-up return.

Passive Flow and the deep-book readings need the order book recorded for the day being played. Live charts are not affected by a replay. Market Replay needs a paid ATAS plan (Plus or higher).

Next: notifications

Chart images. The chart images on this site show the indicator's display on market data, to explain what it draws. They are not trading results or trade recommendations, and the risk and hypothetical performance disclosures above apply to them. We publish no trading performance. The full text is on the disclosures page.

← The Pulling & Stacking ConsoleNotifications →
Sigmantra

Order flow decomposed into one normalized signal. On Bookmap, MotiveWave, Sierra Chart, Quantower, ATAS X and ATAS (Classic).

contact@sigmantra.com
ProductOverviewPricingContact
DocumentationStart hereSignalsStates & alertsSettings referenceUpgrading from 2.xMethodology
ForWho it is forBookmapMotiveWaveSierra ChartQuantowerATAS XATAS (Classic)Order-flow traders
LegalPatent markingPrivacy policyIndicator privacy policyDisclosuresTerms of Sale

Risk disclosure. Futures and forex trading contains substantial risk and is not for every investor. An investor could potentially lose all or more than the initial investment. Risk capital is money that can be lost without jeopardizing one's financial security or lifestyle. Only risk capital should be used for trading and only those with sufficient risk capital should consider trading. Past performance is not necessarily indicative of future results. The possibility of profit is not equal to the possibility of loss: losses can be larger than any gains, and you can lose more than you invest.

The Pulling & Stacking Indicator is an analytical tool. It does not provide investment advice or trade recommendations, and nothing it displays is a signal to buy or sell.

Hypothetical performance disclosure. Hypothetical performance results have many inherent limitations, some of which are described below. No representation is being made that any account will or is likely to achieve profits or losses similar to those shown; in fact, there are frequently sharp differences between hypothetical performance results and the actual results subsequently achieved by any particular trading program. One of the limitations of hypothetical performance results is that they are generally prepared with the benefit of hindsight. In addition, hypothetical trading does not involve financial risk, and no hypothetical trading record can completely account for the impact of financial risk of actual trading. For example, the ability to withstand losses or to adhere to a particular trading program despite trading losses are material points that can also adversely affect actual trading results. There are numerous other factors related to the markets in general or to the implementation of any specific trading program that cannot be fully accounted for in the preparation of hypothetical performance results and all which can adversely affect trading results.

Chart images. The chart images on this site show the indicator's display on market data, to explain what it draws. They are not trading results or trade recommendations, and the risk and hypothetical performance disclosures above apply to them. We publish no trading performance.

Virtual currencies. Some chart images show cryptocurrency instruments. View CFTC advisories, as they contain more information on the risks associated with trading virtual currencies.

Trademarks. Sigmantra™ and Pulling & Stacking™ are trademarks of Sigmantra. Bookmap, MotiveWave, Sierra Chart, Quantower, ATAS X and ATAS (Classic) are trademarks or registered trademarks of their respective owners. Sigmantra is not affiliated with, sponsored by or endorsed by those owners.

© 2026 SigmantraPulling & Stacking Indicator: U.S. Design Patent Nos. D1,099,944 and D1,100,945 (sigmantra.com/patents/)

Sigmantra would like to set analytics cookies to measure which pages traders actually read. Nothing non-essential is set until you choose. No advertising trackers, ever. Privacy policy

Cookie preferences

Choose which cookies may be set

You can change this at any time from “Cookie preferences” in the footer. Declining costs you nothing: the site works identically either way.

Strictly necessary

Keeps the site working and records this very choice. Cannot be switched off.

Always on

No advertising, retargeting, or cross-site tracking cookies are set, and a Global Privacy Control signal is honoured automatically. Full cookie list in the privacy policy