Sigmantra
Trading PlatformsMethodologyDocsPricingContactSign in
Get the indicator
Sigmantra
Trading PlatformsMethodologyDocsPricingContactSign in
Get the indicator
Contents
Start here
Pulling & Stacking IndicatorGetting started on ATAS X
Signals
Flow decompositionThe σ readoutThe window ladderSupport & ResistancePlacement Flow & the core lineLine modesBuy & sell linesThe deep-book warningAbsorption & initiative
Console & alerts
The Pulling & Stacking ConsoleIndicator statesNotifications
Settings reference
ATAS X settings referenceLimitations
Updates & legal
Updates & deprecationTerms, patents & legal
Start here
Pulling & Stacking IndicatorGetting started on ATAS X
Signals
Flow decompositionThe σ readoutThe window ladderSupport & ResistancePlacement Flow & the core lineLine modesBuy & sell linesThe deep-book warningAbsorption & initiative
Console & alerts
The Pulling & Stacking ConsoleIndicator statesNotifications
Settings reference
ATAS X settings referenceLimitations
Updates & legal
Updates & deprecationTerms, patents & legal
Platform
BookmapMotiveWaveSierra ChartQuantowerATAS XATAS (Classic)
Documentation · 3.0.23 · for ATAS X

Getting started on ATAS X

This page covers the Pulling & Stacking Indicator on ATAS X, where it runs as an indicator, in its own panel under the price chart.

The indicator for ATAS X is one file, PullingAndStackingIndicator.ATASX.dll, for ATAS X 8.0.15 or later. Classic ATAS has its own file and its own pages. It needs a data connection that provides market depth (Level II, the order book) and trades for the instrument. It works on live data and on ATAS's Market Replay (see indicator states).

Install

  1. Download the ATAS X zip from your Sigmantra account and unzip it. It holds the DLL, a .sha256 file with the DLL's checksum, and INSTALL.md. The SHA-256 shown beside the download in your account is the hash of the zip itself; the .sha256 file inside is the hash of the DLL. To check the file, open PowerShell in that folder and run (Get-FileHash PullingAndStackingIndicator.ATASX.dll).Hash -eq (Get-Content PullingAndStackingIndicator.ATASX.dll.sha256).Split()[0].ToUpper(). It prints True when the file matches.
  2. Copy PullingAndStackingIndicator.ATASX.dll into %APPDATA%\ATAS X\Indicators\ (paste that path into the File Explorer address bar). Replace the old file if Windows asks. If an older file named PullingAndStackingIndicator.dll is in the same folder, delete it.

ATAS X picks up the new file without a restart. To update the indicator later, remove it from the chart, replace the file the same way, then add it again.

First chart

  1. Open a chart of the instrument you trade.
  2. Click Indicators in the chart's toolbar, open the Custom group and double-click Pulling & Stacking Indicator (or select it and click Apply).
  3. The first time, the Terms and Conditions window opens. Read them and click I accept the Terms and Conditions. Until you accept, the indicator draws nothing and the console does not open. Not now closes the window until the next time ATAS X loads the indicator. To read the terms again at any time, tick Terms (group Terms and Conditions) in the indicator's settings: the terms window opens as soon as you tick it, without Apply.
Adding the Pulling & Stacking Indicator in ATAS X

The lines are drawn in their own panel under the price chart, and the arrows on the price chart. Once you accept the terms, the Pulling & Stacking Console opens beside the chart, in a window of its own, with one tile per instrument. When it starts, a tile shows PAUSED - checking your licence for the first seconds, while the licence is checked, then WAITING FOR ORDER BOOK DATA, then WARMING UP. The order book has no history, so the lines start from the moment you add the indicator, and with the default settings the Resistance and Support band needs about 25 minutes of data.

Market depth. Pulling and stacking is measured on the order book. If the connection sends no depth, the tile's state line says No Level II depth received. If the depth stops while trades continue, it shows ! ORDER BOOK DATA STOPPED. ATAS's built-in "Charting powered by dxFeed" CME data is delayed: use a real-time feed with depth (a broker or data connection, or a crypto exchange connection) for live readings.

Activate your licence

The licence key is in the email you get when you subscribe, and starts with lic_. Until the licence is active, the chart stays empty and the console shows the instrument as PAUSED, with the reason. Accept the Terms and Conditions first: the licence is checked once they are accepted.

  1. Open the indicator's settings: click Indicators in the chart's toolbar and select Pulling & Stacking Indicator in the list of added indicators.
  2. In the Licence group at the top, paste your key into Licence Key.
  3. Tick Activate, then click Apply. If the window stays open, click Apply again.

What you see afterwards:

  • After a few seconds Status, in the same group, says Licence active on this computer. and the lines start. The console's Global notifications show the same message.
  • While the licence is active, Activate stays ticked and Licence Key shows only the start of your key followed by dots. The licence cannot be changed while it is active: release this computer first.

If the key was not accepted, Status says why (for example, that the key could not be found, or that it is active on another computer), and the key stays in the box as you typed it, so you can correct it. The key is stored for this computer, not in the chart or a template. One key covers one computer: ATAS X, Classic ATAS and the other supported platforms on the same computer all count as that one computer.

The licence settings with the licence active

The indicator needs an internet connection: it runs only while the licence server confirms your licence, and there is no offline period. Without a connection it pauses, also when ATAS X starts without one: the tile shows PAUSED - could not reach the licence server. It tries every 30 seconds at first, then every 5 minutes, and starts again by itself once it connects, carrying on with the warm-up it had. If the connection drops for a moment while the indicator is running, it goes on for up to 2 minutes while it tries again (Status says Licence active. Could not reach the licence server, trying again.), then pauses. The licence is checked again once a day.

Release this computer

To move your licence to another computer, release it on this one first: open the indicator's settings and, near the bottom of the list, in the group Release This Computer, tick Release, then click Apply. Status then says this computer has been released, and the indicator stops here (the console tile shows PAUSED - licence required). Activate your key on the new computer. You can also release a computer from your Sigmantra account (Release computer). If you can no longer reach the old computer, write to contact@sigmantra.com.

The console

The console is one window for all your charts, titled Pulling & Stacking Console (ATAS X). Each instrument gets a tile with its headline, the 2, 3, 5 and 10 minute badges, a state line and a log. Alerts are set in the console: the bell on a tile for that instrument, and Global notification settings (top right) for every instrument: on or off (off by default), the threshold (3 standard deviations by default), the minimum time between alerts, the alert sound (with a Test sound button) and the text size. See the console and notifications.

Closing the console with its close box unticks Console on every chart that has the indicator, and the console stays closed, also after a restart, until you tick Console again on a chart and click Apply; the other charts tick theirs again. On Top keeps the console above other windows (off by default). It is one setting for the one console: the chart where it was last changed or applied decides.

ATAS X's Indicators dialog is modal: while it is open, the console's and the terms window's buttons do not respond. Close the dialog (Apply) first.

Where your settings live

  • The indicator's settings are saved with the chart in ATAS.
  • The console's settings, the licence and your acceptance of the terms are kept for your Windows user in %LOCALAPPDATA%\StackSignal\PullingAndStacking. The folder keeps this name in every version of the indicator. The console's settings are kept per build, so ATAS X and Classic ATAS can run side by side, each with its own console.

Every setting is described in the ATAS X settings reference.

Platform notes

  • Short setting names. ATAS cuts long setting names, so the names in the settings are short (for example Depth for Level Depth). Hold the pointer over a setting to see its full name, the one used in these pages, and what it does.
  • What a settings change keeps. ATAS starts the indicator again whenever you apply its settings, and also when you open them and click Cancel. The warm-up, the lines already drawn on this chart, the arrows and the instrument's log in the console are all kept, except after Cancel with edited values: then the warm-up starts again (Cancel without edits keeps it). Changing Depth or New Levels is a different measurement, so the lines and the warm-up start again. Changing Lookback × starts the band's warm-up again. The lines already drawn keep the settings they were drawn with.
  • A Buy / Sell band (a chart in Buy / Sell mode, or Console Mode Buy / Sell on a Flow chart) starts when you choose it and warms over the full lookback (25 minutes at the defaults) before its readings are fully seeded.
  • Value labels. ATAS draws a tag with the latest value of each visible line at the right edge of the flow panel, in its short form (for example 1.75M), and no numeric scale.
  • Crypto and other instruments traded in fractions. Where order sizes are fractional (for example bitcoin), sizes are counted in the instrument's volume step (with a 0.001 step, 1 BTC reads 1,000). The lines and the console's Passive and Aggressive numbers then read in those units instead of contracts; the shapes, bands, σ readings and arrows are unaffected.
  • Market Replay needs a paid ATAS plan (Plus or higher). Passive Flow and the deep-book readings need the order book recorded for the day being played; see indicator states.

Next: the flow decomposition · ATAS X settings reference · the console

Chart images. The chart images on this site show the indicator's display on market data, to explain what it draws. They are not trading results or trade recommendations, and the risk and hypothetical performance disclosures above apply to them. We publish no trading performance. The full text is on the disclosures page.

← Pulling & Stacking IndicatorFlow decomposition →
Sigmantra

Order flow decomposed into one normalized signal. On Bookmap, MotiveWave, Sierra Chart, Quantower, ATAS X and ATAS (Classic).

contact@sigmantra.com
ProductOverviewPricingContact
DocumentationStart hereSignalsStates & alertsSettings referenceUpgrading from 2.xMethodology
ForWho it is forBookmapMotiveWaveSierra ChartQuantowerATAS XATAS (Classic)Order-flow traders
LegalPatent markingPrivacy policyIndicator privacy policyDisclosuresTerms of Sale

Risk disclosure. Futures and forex trading contains substantial risk and is not for every investor. An investor could potentially lose all or more than the initial investment. Risk capital is money that can be lost without jeopardizing one's financial security or lifestyle. Only risk capital should be used for trading and only those with sufficient risk capital should consider trading. Past performance is not necessarily indicative of future results. The possibility of profit is not equal to the possibility of loss: losses can be larger than any gains, and you can lose more than you invest.

The Pulling & Stacking Indicator is an analytical tool. It does not provide investment advice or trade recommendations, and nothing it displays is a signal to buy or sell.

Hypothetical performance disclosure. Hypothetical performance results have many inherent limitations, some of which are described below. No representation is being made that any account will or is likely to achieve profits or losses similar to those shown; in fact, there are frequently sharp differences between hypothetical performance results and the actual results subsequently achieved by any particular trading program. One of the limitations of hypothetical performance results is that they are generally prepared with the benefit of hindsight. In addition, hypothetical trading does not involve financial risk, and no hypothetical trading record can completely account for the impact of financial risk of actual trading. For example, the ability to withstand losses or to adhere to a particular trading program despite trading losses are material points that can also adversely affect actual trading results. There are numerous other factors related to the markets in general or to the implementation of any specific trading program that cannot be fully accounted for in the preparation of hypothetical performance results and all which can adversely affect trading results.

Chart images. The chart images on this site show the indicator's display on market data, to explain what it draws. They are not trading results or trade recommendations, and the risk and hypothetical performance disclosures above apply to them. We publish no trading performance.

Virtual currencies. Some chart images show cryptocurrency instruments. View CFTC advisories, as they contain more information on the risks associated with trading virtual currencies.

Trademarks. Sigmantra™ and Pulling & Stacking™ are trademarks of Sigmantra. Bookmap, MotiveWave, Sierra Chart, Quantower, ATAS X and ATAS (Classic) are trademarks or registered trademarks of their respective owners. Sigmantra is not affiliated with, sponsored by or endorsed by those owners.

© 2026 SigmantraPulling & Stacking Indicator: U.S. Design Patent Nos. D1,099,944 and D1,100,945 (sigmantra.com/patents/)

Sigmantra would like to set analytics cookies to measure which pages traders actually read. Nothing non-essential is set until you choose. No advertising trackers, ever. Privacy policy

Cookie preferences

Choose which cookies may be set

You can change this at any time from “Cookie preferences” in the footer. Declining costs you nothing: the site works identically either way.

Strictly necessary

Keeps the site working and records this very choice. Cannot be switched off.

Always on

No advertising, retargeting, or cross-site tracking cookies are set, and a Global Privacy Control signal is honoured automatically. Full cookie list in the privacy policy